ca-nv-awwa-bpat-recertifying-candidate Practice Test

1Single Choice

An installation of a reduced pressure principle backflow prevention assembly (RP) must include which of the following clearances to comply with CA-NV AWWA standards and the USC Manual of Cross-Connection Control?

A.At least 6 inches clearance on all sides and 12 inches above the assembly
B.At least 12 inches clearance on the back and sides and 24 inches above the assembly, with adequate clearance in front for testing and repair
C.At least 24 inches on the back, 12 inches on the sides, and 6 inches above the assembly
D.A minimum of 36 inches clearance on all sides with no requirement above

Reveal the answer to continue